Description

Frame Rail Mounted

Developed for: Front Loaders and Roll-off Hoists. In this configuration, two 25-inch diameter by 80-inch long 40 DGE tanks are mounted, one on each frame rail, to provide a total capacity of 80 DGE. Availability of this option depends upon the specific chassis and body options you choose.

Roof Transverse Mounted

Developed for: Rear Loaders and Automated Side Loaders. The roof transverse configuration is similar to the Front of Body design, except that the pod is bolted to brackets which are welded to the top of the body. The wheelbase (WB) remains the same as for a diesel unit, but the overall height is increased by 12-20 inches.

Front of Body Mounted

Developed for: Rear Loaders. in this configuration, the pod contains either four or five 16-inch diameter tanks. Each tank is 15 DGE, giving a total capacity of 60 or 75 DGE. The pod is bolted to brackets which are welded to the front of the body. This design does not increase overall height (OAH), but does require an increased wheelbase WB of 18-24 inches.

Roof Longitudinal Mounted

Developed for: Front Loaders. To ensure an OAH that does not exceed 13 feet, 6 inches on a front load collection vehicle with a top door (and a chassis frame rail height less than 43 inches), this configuration uses four 13-inch diameter by 120-inch long tanks, running lengthwise on the top of the body and providing 59 DGE. An additional tank can be added on the frame rail to achieve 73 DGE.

Behind the Cab Mounted

Developed for: Heil STARR® System. Specifically available for Heil’s STARR® System, a semi-trailer automated side loader, this design is similar to the Front of Body design except that the tanks are mounted to the chassis frame rails, directly behind the cab, to enable operation of the chassis when the trailer/body is not attached.